| 4g61t.org http://4g61t.org/forum/ |
|
| 4g61t turbo and injectors? http://4g61t.org/forum/viewtopic.php?f=26&t=37552 |
Page 1 of 2 |
| Author: | 87_4g61t [ Tue Feb 26, 2013 1:43 pm ] |
| Post subject: | 4g61t turbo and injectors? |
New to the mitsu world just wondering if they make a larger turbo and injectors for the 4g61t if so where can I find them? Thanks. |
|
| Author: | CaptainTonus [ Tue Feb 26, 2013 2:35 pm ] |
| Post subject: | Re: 4g61t turbo and injectors? |
Moved this to newbie tech. To answer your question, yes, there are LOTS of options for upgrading the turbo and the injectors on a 4g61t. What are your goals for the car? |
|
| Author: | 87_4g61t [ Tue Feb 26, 2013 5:14 pm ] |
| Post subject: | Re: 4g61t turbo and injectors? |
For now just building power is like to end up at about 300 whp and run it in autocross. Where do I look to find performance parts? |
|
| Author: | Broke4speed [ Tue Feb 26, 2013 6:00 pm ] |
| Post subject: | Re: 4g61t turbo and injectors? |
300whp + autocross + FWD = bad time, lol. |
|
| Author: | 87_4g61t [ Tue Feb 26, 2013 6:32 pm ] |
| Post subject: | Re: 4g61t turbo and injectors? |
I just want to have fun lol not blow as much shit up.. still looking for a website?? |
|
| Author: | CaptainTonus [ Tue Feb 26, 2013 8:22 pm ] |
| Post subject: | Re: 4g61t turbo and injectors? |
Quote: I just want to have fun lol not blow as much shit up.. still looking for a website??
There's nothing that caters specifically to a 4g61t. You're going to using 4g63t parts. There are a plethora of websites to choose from.www.extremepsi.com www.maperformance.com www.roadraceengineering.com www.buschurracing.com www.jayracing.com www.ebay.com |
|
| Author: | 87_4g61t [ Tue Feb 26, 2013 9:20 pm ] |
| Post subject: | Re: 4g61t turbo and injectors? |
Thanks man! |
|
| Author: | 87_4g61t [ Tue Feb 26, 2013 10:15 pm ] |
| Post subject: | Re: 4g61t turbo and injectors? |
So the 4g63 parts will just bolt up? |
|
| Author: | Flying Eagle [ Tue Feb 26, 2013 10:33 pm ] |
| Post subject: | Re: 4g61t turbo and injectors? |
Yes, all but the water pump, fuel rail (well the 89 was specific and you should keep it if you have a 4g61t), timing belt, no balance shafts, and head gasket because of the smaller bore on the 4g61. Your upgrade path is like bolting on everything at the front of the motor from a 1990 Talon/Eclipse turbo for your easiest solution. Throttle body will also bolt up, MAF, injectors, exhaust manifold, turbo 14b-16G, exhaust downpipe, and the list goes on. Go hunting the archives for what people bolt up to a 4g63 and it will fit a 4g61 with very few exceptions which were stated above. The only problem I had was upgrading a 4g61t to a 4g63t, because the increase in block height brought the exhaust manifold and turbo up a few mm, and caused the already large and upgraded exhaust to pull up to the body and cause a nasty vibration. You won't have this problem when building from scratch. Check out my member thread, Coltixim, and tons of other peoples for inspiration. "Almost" everyone here now is driving a swapped or original turbo car, so most member threads from North America, AUS and NZ have turbo'd cars. Heck find "snowdevl"s, to4garret, and some others too. Noticed you wanted to upgrade the turbo and injectors. Well if you want a bigger turbo, you need a DSM 1G/2G/EVO3 exhaust manifold to bolt up the td05 exhaust CHRA's to. the stock 11b for a 4g61t has only three holes for the turbo to bolt to the manifold. You need the four bolt flange and they used a four bolt from 1987-1995 at a minimum. |
|
| Author: | xxNocturnalxx [ Sun Jul 19, 2015 1:42 pm ] |
| Post subject: | Re: 4g61t turbo and injectors? |
Quote: Noticed you wanted to upgrade the turbo and injectors. Well if you want a bigger turbo, you need a DSM 1G/2G/EVO3 exhaust manifold to bolt up the td05 exhaust CHRA's to. the stock 11b for a 4g61t has only three holes for the turbo to bolt to the manifold. You need the four bolt flange and they used a four bolt from 1987-1995 at a minimum. 
|
|
| Author: | Flying Eagle [ Sun Jul 19, 2015 3:10 pm ] |
| Post subject: | Re: 4g61t turbo and injectors? |
9b, likely my bad for writing 11b. The 3000GT's likely had twin 11b's ... or some such. |
|
| Author: | xxNocturnalxx [ Sun Jul 19, 2015 8:49 pm ] |
| Post subject: | Re: 4g61t turbo and injectors? |
Ok, thanks for clearing that up! |
|
| Author: | Flying Eagle [ Mon Jul 20, 2015 10:04 pm ] |
| Post subject: | Re: 4g61t turbo and injectors? |
I'm not sure anymore. Honestly .... Someone has to back me up here or completely debunk me. I never had the stock turbo and it is not engrained to my memory like it should be! Yes, we should clear this up .... haha. |
|
| Author: | xxNocturnalxx [ Tue Jul 21, 2015 8:39 am ] |
| Post subject: | Re: 4g61t turbo and injectors? |
I will try to update this with some pics of my 11bs with serial numbers ect. I believe the 3kgt would have the 3 bolt turbos which would be the 9b. |
|
| Author: | Incoltnito [ Tue Jul 21, 2015 12:31 pm ] |
| Post subject: | Re: 4g61t turbo and injectors? |
Quote: I will try to update this with some pics of my 11bs with serial numbers ect. I believe the 3kgt would have the 3 bolt turbos which would be the 9b.
To your credit, and my recollection, 3-bolt 9b turbos on the 3kgt. Some upgraded to 11b turbos and saw gains, but I assume they used the 9b center cartridge with 11b parts to retain the 3-bolt pattern.
|
|
| Page 1 of 2 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|