4g61t.org

Hi there,... soo.. im thinking about getting a 1g talon and a 4g 95 mirage and doing a swap. What difficulties would i be going through and would it just drop in? I was doing a 1g swap to a 3g csm a year ago but never got to it and had to abandon it. I can get both cars for 1200. I have 90 harness, engine mounts for a 1g motor to 3g csm, harness adapter ( i think its was only made for 89-90 talon years as the other years are a bit different ) from the previous failed project.. Now would my mounts that i have fit for this swap (94mirage+1g4g63) Also would i be able to use the 1g engine harness instead of the 4g harness or have to mock up the 4g harness, if so which/what plugs/wiring would i be looking into? thanks

_________________
Build it, Race it, Break it, REPEAT!!!!

I know this is a csm site but i'll try my luck,

_________________
Build it, Race it, Break it, REPEAT!!!!

The 4g cars are completely different in every way except that the engine and trans are still on the right side so at least the engine/trans will work. However you will need custom mounts and a different adapter harness for your 1g engine harness. If you're not planning on making a ton of power you can source a 1.8 F5M22 trans from a 93-96 csm and it will bolt to the 4G63 if you use a smaller na flywheel/clutch combo. I believe you can use a 2g dsm t-belt mount along with the stock mounts from the 1.8 trans and it will all bolt right in.

If you want to use a 1g dsm transmission you will have to make custom mounts and roll stops for the front, rear and top transmission mounts. A 2g dsm trans will bolt in but then you have to source axles from a 92.5-94 fwd turbo dsm since they have the larger inner axle stubs.

Hope this helps! Also if you are planning to do a manual swap I have a rare set of LS hydraulic pedals laying around should you need them.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual

dang, lol. what about the wirings. can i use the 1g harness? if i do the only wiring i would mostly have trouble on is the interior plugs.

_________________
Build it, Race it, Break it, REPEAT!!!!

Yes you can use the 1g engine harness, I make a plug and play adapter if you need one.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual