4g61t.org

hi what the difference between the c62a and the c52a sway bar are their the same

The sway bar in the turbo csm is a few mm thicker than the non-turbo sway bar.

_________________
Had a:
1991 Eagle Summit ES Hatchback - 4g15 12v 5spd
1991 Dodge Colt -4g15 12v 4spd
Have a:
1978 Oldsmobile Cutlass - 468BBO TH350
Round 3:
1990 Dodge Colt-4G63T 5spd

so the both are interchangeable then
i can use c62a sway bars on my c52a
please answer

Give me your VIN !

C52a colt bar part number : MB518788

But for C62a lancer it's VIN depend...

the problem i cant get c62a sway bars
nut i have a c52a so i need to no if i can use c62a sway bars

You should be able to use them, the front clip of every csm is pretty much the same.

_________________
Had a:
1991 Eagle Summit ES Hatchback - 4g15 12v 5spd
1991 Dodge Colt -4g15 12v 4spd
Have a:
1978 Oldsmobile Cutlass - 468BBO TH350
Round 3:
1990 Dodge Colt-4G63T 5spd

I would be very surprised if they were different part numbers or even shaped differently.

I put a 92 hyundia elantra sway bar on my 91 sedan (c62a). This swap requires different end links, 1g DSM ones if I recall.

_________________
05 wrx wagon
99 Benz ML 320
91 eagle summit swapped - 6/4 bolt combo
94 Audi s4 - sold
88 Eagle Vista Turbo LX sedan, RIP

I put the same sway bar in one of my old C52a's, so this confirms that the bar is the same because the Elantra bar is the same.
Yes, 1G style end links are required, so you have to throw out the old crush/sandwich style links with the old bar.

Turbo csm's also use the dsm style end links.

_________________
Had a:
1991 Eagle Summit ES Hatchback - 4g15 12v 5spd
1991 Dodge Colt -4g15 12v 4spd
Have a:
1978 Oldsmobile Cutlass - 468BBO TH350
Round 3:
1990 Dodge Colt-4G63T 5spd