4g61t.org

so looking for setups, so I can get some ideas thrown around for the red pepper project, any pics of your gauges or pillar pods

_________________
89 turbo chili
92 gvr4 96/1000- sold to mois used car lot

In my AWD swapped GT I had this setup from a P.O.:


In my GVR4 I had this from a P.O.:


In the Scummit I am going to make a plate out of lexan/acrylic that will cover that lower tray directly in front of the shift boot and under the ash tray. The gauges will be mounted in this plate and the back of the plate painted black. I will definitely takes pics once it is done.

The gauge setup in my previous Mirage.

_________________
91 GSX - 511fwhp and 352 lb/ft 25psi 110 octane, 7.68 @ 95.9mph 1/8th 21psi 91 octane, 11.93 @ 112.9mph, 117.7mph best trap speed, 20psi 91 octane
98 Volvo S70 T5 - DD

http://www.facebook.com/captaintonus

Who made that vent mount?

A member of the forum who never posts anymore. His name is eargasm6969. It took him like a year to do it, but he did it.

_________________
91 GSX - 511fwhp and 352 lb/ft 25psi 110 octane, 7.68 @ 95.9mph 1/8th 21psi 91 octane, 11.93 @ 112.9mph, 117.7mph best trap speed, 20psi 91 octane
98 Volvo S70 T5 - DD

http://www.facebook.com/captaintonus

This is where Nate put the boost gauge, but then I sacraficed the drivers dash vent using a steel filler plate glued in and then used body filler to smooth it and then used black krinkle finish. I thought it turned out ok for being a free mod. The only reason for the monster tach was i could never get the wacko tacho adapter to work. I made a little L shaped bracket that bolted to the hvac control behind the radio bezel.

Im getting a buddy of mine who works at a local metal company that makes various stuff to fab up a aluminum gauge bezel to put inplace of the vents. He's also offered to make me darn near anything I can think of because he has a electronic lathe and cnc machine at his disposal. One idea I have for him that I've drawn up is a bracket that bolts into the PS spot to run a vaccum pump for a trick pcv set up. I'll keep you guys informed on the bezel!

ABS plastic tubing 2" will fit the 52mm gauges. These are Defi Racer Gauges - blue.
Blocks off your fuel level unless you stick your head over a bit, but everything else is properly visible.
Very similar to what was first posted, and does sacrifice the plastic top shield. You also need fibreglass, hot glue and bondo.





I cut that filler way back, so it pays to be good with a thin amount of fibreglassing, but just enough that it does not crack when you
have to file and sand it all. Bondo isn't that structural anyways.

thanks for the great outcome, anyone have used or adapted pics of pillar pods or dash pods or even mouning to the windshield?

I want more pictures of your underdash where the drivers front speaker would be.
It almost looks like a lightened underdash compared to the original USDM variety.

Heres a pic of all the nastiness before I took the car home. The speaker grills were a slotted plastic and the glove box looked like a normal us one but opened up like a big bucket. It was hinged lower on the dash and tilted out. I had to swap out the whole lower piece of the dash to get the common one to fit.

^ thats the interior lower dash that came in Canadian cars.

_________________
05 wrx wagon
99 Benz ML 320
91 eagle summit swapped - 6/4 bolt combo
94 Audi s4 - sold
88 Eagle Vista Turbo LX sedan, RIP

Looks like my car was the red headed step child of the bunch...Yeah.. I said it!

_________________
/// /// ///

First setup


For update i have removed the Scanmaster and add AEM oil&fuel presure gauge

@ bowdown : Which are these seats ?
Thanks