4g61t.org

Specializing in the 3g CSM
It is currently Fri Mar 29, 2024 9:46 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 14 posts ] 
Author Message
 Post subject: wiring harness
PostPosted: Sat Dec 30, 2006 4:31 pm 
Offline
Member

Joined: Sat Jul 08, 2006 11:11 am
Posts: 97
Location: Minneapolis MN
a friend of mine is doing the swap 4g63t into a colt, he bought a turbo dsm wiring harness from ebay and its incomplete. its only the wiring along the firewall and into the car. I know there are differences between the wiring harnesses, but is the part of the harness that goes over the intake manifold and has the injector clips the same turbo and NT????

can anyone confirm???


thanks

_________________
red 92 colt
*4g63 swapped 13g 390cc
cyclone manifold shitty sidemount

*1950 buick super riviera


Top
   
 Post subject:
PostPosted: Sat Dec 30, 2006 7:55 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
I'm not following you. When I removed the turbo dsm wiring harness it was all one piece. All of the engine connectors were on it and it went through the firewall and had 3 connectors. Sounds like the one you are talking about got cut.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
 Post subject:
PostPosted: Sat Dec 30, 2006 7:59 pm 
Quote:
Sounds like the one you are talking about got cut.
+1

-bit


Top
   
 Post subject:
PostPosted: Sat Dec 30, 2006 8:19 pm 
Offline
CSM Expert
User avatar

Joined: Sat Nov 03, 2001 7:00 pm
Posts: 2187
Guess ill be making a 4G63 swap wiring harness DVD too :rolleyes:


Top
   
 Post subject:
PostPosted: Sat Dec 30, 2006 9:33 pm 
Offline
Member

Joined: Sat Jul 08, 2006 11:11 am
Posts: 97
Location: Minneapolis MN
ok I'll clear it up a little. The harness has the fuse block on one end the big fuse block the main one, the ecu connecters on the other. its super thick all wraped, no signs of cutting at all. ok the tri fuse block that sits on top of the battery is even attached to it.

Supposedly the guy he bought it from got it off a galant vr4 so I dunno if their is a difference or not. but Im telling you there are no injector clips on the damn thing. some relays...etc and other various firewall items, but no injector clips.

_________________
red 92 colt
*4g63 swapped 13g 390cc
cyclone manifold shitty sidemount

*1950 buick super riviera


Top
   
 Post subject:
PostPosted: Sat Dec 30, 2006 9:37 pm 
Offline
Some call me a god
User avatar

Joined: Sat Nov 20, 2004 10:53 pm
Posts: 2347
Location: Missouri
If there aren't any injector clips, it has to be cut. That is not a separate set of wires, it is hardwired from injectors to ecu.

_________________
John
89 Colt GT(2)
88 d50 4g63t, crower 272's, dsmlink


Top
   
 Post subject:
PostPosted: Sat Dec 30, 2006 9:38 pm 
Offline
abnormal

Joined: Sat Mar 11, 2006 4:34 pm
Posts: 436
Location: New port richey/tampa,florida
Quote:
Guess ill be making a 4G63 swap wiring harness DVD too :rolleyes:
+1 you should make an entire swap dvd


Top
   
 Post subject:
PostPosted: Sat Dec 30, 2006 9:39 pm 
Offline
abnormal

Joined: Sat Mar 11, 2006 4:34 pm
Posts: 436
Location: New port richey/tampa,florida
Quote:
ok I'll clear it up a little. The harness has the fuse block on one end the big fuse block the main one, the ecu connecters on the other. its super thick all wraped, no signs of cutting at all. ok the tri fuse block that sits on top of the battery is even attached to it.

Supposedly the guy he bought it from got it off a galant vr4 so I dunno if their is a difference or not. but Im telling you there are no injector clips on the damn thing. some relays...etc and other various firewall items, but no injector clips.
i saw this recently i think he bought the interior harness


Top
   
 Post subject:
PostPosted: Sat Dec 30, 2006 9:42 pm 
Offline
Some call me a god
User avatar

Joined: Sat Nov 20, 2004 10:53 pm
Posts: 2347
Location: Missouri
Quote:
Quote:
ok I'll clear it up a little. The harness has the fuse block on one end the big fuse block the main one, the ecu connecters on the other. its super thick all wraped, no signs of cutting at all. ok the tri fuse block that sits on top of the battery is even attached to it.

Supposedly the guy he bought it from got it off a galant vr4 so I dunno if their is a difference or not. but Im telling you there are no injector clips on the damn thing. some relays...etc and other various firewall items, but no injector clips.
i saw this recently i think he bought the interior harness


If it has the battery fuse block attatched, it is an engine harness.

_________________
John
89 Colt GT(2)
88 d50 4g63t, crower 272's, dsmlink


Top
   
 Post subject:
PostPosted: Sat Dec 30, 2006 9:56 pm 
Offline
Member

Joined: Sat Jul 08, 2006 11:11 am
Posts: 97
Location: Minneapolis MN
there are no injector clips but there are weird other clips that look like they could fit but dont. there are four green rubber plug type things. they have green wires one with a white stripe and one with a black they are also spotted with red. Im pretty sure they have something to do with the fuel. its a complete harness, I mean its still all factory wrapped and all. its dirty too. my keyboard is greaser then hell now :-? .

_________________
red 92 colt
*4g63 swapped 13g 390cc
cyclone manifold shitty sidemount

*1950 buick super riviera


Top
   
 Post subject:
PostPosted: Sun Dec 31, 2006 12:12 am 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
Post some pics of it.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
 Post subject: Re: wiring harness
PostPosted: Sun Sep 29, 2013 9:48 pm 
Offline
Restricted Newbie

Joined: Sun Sep 22, 2013 12:36 am
Posts: 2
It is for sure two seperate harnesses indeed I removed one out of a dsm yestarday.the one with the fuse block is not the same one for the engine. It connects togather with 1 plug 6 or 7 wires from memory.

Ouch from 2006 I didn't notice the date.


Top
   
 Post subject: Re: wiring harness
PostPosted: Sun Sep 29, 2013 10:51 pm 
Offline
The Silent Administrator
User avatar

Joined: Wed Dec 24, 2003 3:32 pm
Posts: 9524
Location: Ottawa, ON, Canada
This is a 91 Eagle Talon harness. Turbo model.

Image

Injector connectors are on the far right. Two blue, two black.


Top
   
 Post subject: Re: wiring harness
PostPosted: Mon Sep 30, 2013 8:42 am 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
Quote:
It is for sure two seperate harnesses indeed I removed one out of a dsm yestarday.the one with the fuse block is not the same one for the engine. It connects togather with 1 plug 6 or 7 wires from memory.

Ouch from 2006 I didn't notice the date.

We were talking about the smaller fuse box that connects to the + side of the battery. Not the larger one that mounts to the inner fender.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 14 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited