4g61t.org

Guys,
I bought a set of driveshafts so I have something to use whilst I get the other set reconditioned.

The set I bought from the junkyard has a bit of surface rust on the ends of the shaft that go into the tranny - what do i do? can i still use them?

Should I sand off the rust?

go here for a pic of the rust on the driveshaft:

http://members.optusnet.com.au/~onnzo/mypic43.jpg

Mike

take some wd40 and spray abit on the rust. use a towel and the rust stains will come off no problem.

_________________
92' Dodge Colt 200GT - 4G63T - Taking Offers.

Wow - that was a quick reply! Cool - ill try it now.

Mike

on a side note - I got a stock td05h 14b today to replace my hi flowed unit - hopefully itll spool better!

Ive put up a pic on my website if you want to have a look

http://members.optusnet.com.au/~onnzo/

Mike

If that doesn't work, just take a wire brush to it. The rust shouldn't matter much as long as it's not causing fitment problems.

_________________
Jason Veraldi
Scammer
http://www.4g61t.org/forum/viewtopic.php?f=3&t=34532

Thanks guys - I jsut went out and sprayed some wd40 onto it - most of it came off - ill try a little sand paper (very fine of course) to get the rest of it off!