4g61t.org
http://4g61t.org/forum/

Guys with hatch release lever, need help.
http://4g61t.org/forum/viewtopic.php?f=22&t=40341		 Page 1 of 2
Author:  89Mirageman [ Mon Sep 07, 2015 8:06 am ]
Post subject:  Guys with hatch release lever, need help.
Can somebody take a pic of their hatch release setup at the back of the car? I'm guessing a cable runs to the bottom and somehow trips that tiny pin on the assembly up on the hatch. I'm trying to rig up a cable setup that I pulled from a 4g LS car, hoping they are similar even though the 4g has an actual trunk and not a hatch.
Author:  slowdsm [ Mon Sep 07, 2015 12:06 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
ur 4g doesnt have a cable trunk lock? I can take pics later of my 4g and 3g if u want both..


Steve
Author:  Incoltnito [ Mon Sep 07, 2015 3:12 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
Just a minute here, I will post some up for you....
Author:  Incoltnito [ Mon Sep 07, 2015 3:28 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
The last two are no help.

Image

Image

Image

Image
Author:  89Mirageman [ Mon Sep 07, 2015 9:05 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
That's exactly what I needed to see, thanks! That you in the tree? :lol:
Author:  Incoltnito [ Mon Sep 07, 2015 9:44 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
You betcha, buddy! Yes, that's me up there.
Author:  89Mirageman [ Tue Sep 15, 2015 1:39 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
New request, does anybody have a pic of the small metal tab that goes in the gas door? It makes the door pop open when you pull the lever. Mine never had this or it came off. The one on my 4g is different. I'm hoping this piece is still on the one hatch left at the yard but if not I'm hoping it came on other Mitsu's as well.
Author:  acrazyjohnny [ Tue Sep 15, 2015 3:01 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
hey chris does the 4g latch match the same as the 3g. io was thinking the galant are the same as the 3g .the pull levers look to be the same shape.
Author:  89Mirageman [ Tue Sep 15, 2015 4:03 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
The 4g levers are identical except for one tab on the top. The 4g one bolts on with two bolts, the 3g just uses one. I cut it off with my cutoff wheel and it worked perfect. I used the 3g cables and the hatch piece though, Natedog happened to have a complete setup laying around but the levers were bad.
Author:  Natedog [ Tue Sep 15, 2015 4:38 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
Odd, I think the part you are looking for is on the lock mechanism. I'll dig mine up and get a picture...
Author:  quikgt [ Tue Sep 15, 2015 4:40 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
I may still have the complete cable assembly that was pulled out of a car years ago; if your interested?
Author:  89Mirageman [ Tue Sep 15, 2015 5:51 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
This part actually snaps onto the fuel door. It's really not part of the levers and cables. It's basically a bent piece of metal and it snaps onto the inside of the fuel door. When you pull the lever and it releases the fuel door this piece helps the door to spring open.
Author:  LILEVO [ Tue Sep 15, 2015 6:12 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
Image
Author:  Natedog [ Tue Sep 15, 2015 7:03 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
^ nope, its actually a little piece of metal that works as a spring, its where the fuel door bolts to the chassis. I emailed him some pictures earlier of it.
Author:  LILEVO [ Tue Sep 15, 2015 7:09 pm ]
Post subject:  Re: Guys with hatch release lever, need help.
Oh. fail. I was trying to get rid of that piece :)
Page 1 of 2 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/