Hello,
I'm sure this has been beaten to death already but was hoping for some insight regarding my specific setup.. I plan to drag race the car this year in FWD M/T fashion. It is an 89 factory turbo mirage with GVR4 knuckles and brakes up front as well as AWD axles that are equal length with intermediate shaft. My problem is I would like to run a 13x8 inch wheel with a pair of slicks. I was thinking the twin piston GVR4 calipers and rotors would not allow this to work and was just curious if anyone had any opinions on my easiest way to fit a 13 inch wheel..
This is the wheel I was hoping to use
http://www.summitracing.com/parts/crw-1 ... /overview/