4g61t.org
http://4g61t.org/forum/

Coilover and wheel wheels/offset thread
http://4g61t.org/forum/viewtopic.php?f=22&t=37429
Page 4 of 4

Author:  Blackgsx01 [ Sun Oct 11, 2015 10:53 am ]
Post subject:  Re: Coilover and wheel wheels/offset thread

Well I have come across some Scion tC 16x6.5 5x114.3 +45 offset steel rims

Would these work?

Author:  CaptainTonus [ Sun Oct 11, 2015 5:40 pm ]
Post subject:  Re: Coilover and wheel wheels/offset thread

Yes they will work

Author:  sharkmobil [ Tue Apr 05, 2016 5:29 pm ]
Post subject:  Re: Coilover and wheel wheels/offset thread

Quote:
I run 225/50 tires on 16x7 wheels with +40 offset. My car is slammed in coil overs and the wheels are tucked in the fender still. However I did have to remove the front inner fender liners and roll the fender lip. It's a tight fit when lowered.
True, ... true.

Author:  mikbik [ Tue Aug 09, 2016 8:53 pm ]
Post subject:  Re: Coilover and wheel wheels/offset thread

would a 15x6.5 and 38 offset w// multi lug pattern fit our CSM captive rotors? My other options is 16x7 w/ 45 offset and also a multi lug. Among the options w/c is a better

Author:  Keane [ Tue Aug 09, 2016 9:52 pm ]
Post subject:  Re: Coilover and wheel wheels/offset thread

I would go with the first choice for a better fit. But both will fit decent. Its the center bore you may have to measure to be sure they will fit

Author:  Flying Eagle [ Tue Aug 09, 2016 10:07 pm ]
Post subject:  Re: Coilover and wheel wheels/offset thread

What brakes are you running?
If you have the stock base model solid front rotors and drums in the rear, I don't recommend adding upsrung weight to the front and rear of the car, as 100% this will.
Acceleration will be slower, as will deceleration, with only cornering being a bit better assuming you haven't moved the wheels too far in or out.
If you have turbo brakes, disregard as it is less of a concern.

Author:  mikbik [ Wed Aug 10, 2016 12:12 am ]
Post subject:  Re: Coilover and wheel wheels/offset thread

the bore size says 72.6

also does a 38 offset better than 45? based on the post above 40+ above is a much better choice

Author:  xxNocturnalxx [ Wed Aug 10, 2016 8:47 am ]
Post subject:  Re: Coilover and wheel wheels/offset thread

Depends on your wheel width and tire size, we cant tell you to go with +38 or +45 based on nothing. I personally like a slightly lower offset and run +34 on 15x7 225/50s but they are more like 235s as the tire I use runs on the big side, I had to roll the front fenders.

Author:  mikbik [ Wed Aug 10, 2016 6:48 pm ]
Post subject:  Re: Coilover and wheel wheels/offset thread

im just worried if the +38 wheel be out sticking out of the fender or hit something inside the suspension on full turns compared to +45. what's the limit on tire size can the +38 offset handle im planning on 195/50 can it handle 205/50 or 205/55? what about the +45 tire size choices?

Author:  xxNocturnalxx [ Thu Aug 11, 2016 7:41 am ]
Post subject:  Re: Coilover and wheel wheels/offset thread

A 205/50 would be a good fit for +38.

Author:  mikbik [ Mon Sep 12, 2016 1:01 pm ]
Post subject:  Re: Coilover and wheel wheels/offset thread

im looking for wheel offset options of +38 ,40 or 42 which is the best to go among this 3 on 15's

Author:  CaptainTonus [ Tue Sep 13, 2016 12:02 am ]
Post subject:  Re: Coilover and wheel wheels/offset thread

Any of them are fine

Page 4 of 4 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/