4g61t.org

Hi,

I made a quick search on the forum, but didn't find my answer. What are you using as SS clutch lines into your CSM (3rd gen.) ?

DIY hose with AN fitting ?
DSM aftermarket (a bit too long) ? (1G vs 2G ??)
Custom hose from a local hydraulic shop ?

Can some one tel me how "too long" is a DSM clutch line into 3rd gen. CSM engine bay ? (approx.)

If there is already posts with those informations, please let me know (here) !

Thanks !

_________________
Dodge Colt 1992 4G63T -= Racing Car =-
Toyota Corolla S 2015 -= Daily Car =-
Mitsubishi Outlander V6 2009 -= Family Car =-

1G DSM for a 3G CSM is really long, way too long. I would have shortened it a bunch but it still fit, but with some excess that had to be zip-tied in a few places.

I wish I knew how long it was, unravelled.

I got the kit from Ziggy at RTMRacing.com and it was a bolt-on and bleed/go affair for the turbo Colt.

I saw nothing on RTM web site. Do you know if the parts come from a EVO 1-2-3 ? By any chance, do you have a part number ?

thanks.

_________________
Dodge Colt 1992 4G63T -= Racing Car =-
Toyota Corolla S 2015 -= Daily Car =-
Mitsubishi Outlander V6 2009 -= Family Car =-

I use the 1g ss master to slave line, it seems to be about 2-3ft. too long so I have it looped but it works great. I got it from extremepsi.

http://www.extremepsi.com/store/product ... t=0&page=1

1g ss line 82in.
2g ss line 96in.

_________________
89 Mirage Billet 20g 63t 12.4@120 417whp 400wtq @ English Racing.
89 Colt GT E316g
06 Silverado SS
07 ZX6R

I have a stainless master to slave line for a 1g and it fits just fine. No looping or anything. It may be an inch or two too Long but that's it

_________________
_____________________
1993 single turbo supra
2000 Lexus sc300
2016 ram 1500

Where did you get it from?

_________________
89 Mirage Billet 20g 63t 12.4@120 417whp 400wtq @ English Racing.
89 Colt GT E316g
06 Silverado SS
07 ZX6R

https://www.rtmracing.com/xcart/product ... 886&page=1
Clutch and related components section for the 1G.

It's the same one you have nocturnal. Maybe they were revised at some point?

_________________
_____________________
1993 single turbo supra
2000 Lexus sc300
2016 ram 1500

I see, well I guess it may just depend on how it's routed then or maybe there was a revision.. To the OP, looks like you should be just fine running the 1g line

_________________
89 Mirage Billet 20g 63t 12.4@120 417whp 400wtq @ English Racing.
89 Colt GT E316g
06 Silverado SS
07 ZX6R

Hi all's.

I have contacted today Techna-fit company for a shorty version of the Eclipse 1G clutch line.
I think we need a 53 inch version for a perfect fit.

Let me know if you are interested.
I take one custom made for sure.

Remy

Custom 53 inch clutch line from this company cost 38$ each.
I need to know if it come in complet kit, please wait ...

Confirmed, 38$ for the complet kit, still waiting for a US shipping quote...

I have a local Earls fittings shop where I got mine made, I'm sure you could get one made somewhere or summit or jegs might have something.

_________________
92 Colt GL 4g63t + AWD swap
00 Mirage LS

I'd go to the local shop that way you get the proper length you want. I go to the place by me that sells by the foot & and buy the fittings, decent prices. IV even used brake lines from slave to master on previous swaps. Lol

_________________
Speed kills!! Drive a Honda & live forever!

That is a good deal and a better fit!

Great idea.