4g61t.org http://4g61t.org/forum/ |
|
14b/16G on 4g61 http://4g61t.org/forum/viewtopic.php?f=2&t=418 |
Page 1 of 1 |
Author: | Guest [ Wed Dec 31, 1969 7:00 pm ] |
Post subject: | 14b/16G on 4g61 |
Here is a list of parts needed to install a 14b or 16G on a 4g61 engine. [b:570a00fn]Parts Needed[/b:570a00fn] 1G or 2G exhaust manifold, or port your 4G61 (not recommended) 1G or 2G o2 housing MD140476 new waterpipes (these are needed to fit turbo to car) MF650114 x2 two waterpipe banjo fittings/eyebolts MF660065 x4 four water copper crush washers MD117764 gasket between o2 housing and turbo you also need the 12mm banjo for the oil line into the turbo [b:570a00fn]Other parts[/b:570a00fn] Not necessary but *highly* recommended from a turbo builder's standpoint: New oil feed line MD140394 New oil return line MD150523 MD311230 new o2 sensor New gaskets and copper crush washers. *Info provided by Ben K. **More info provided by Cyborg |
Page 1 of 1 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |