4g61t.org

I need help with a suspention set up for a 1991 mirage LS that could be used for street and rally cross mostly rally cross this isn't my daily driver Intrax i think would be to low any info. could help thank you

_________________
1991 MIRAGE , 2003 OUTLANDER

search for ground control you can see my setup its great for the street just increase the spring valuse o get something stiffer for rally cross

i couldn't find the pics

_________________
1991 MIRAGE , 2003 OUTLANDER

There are no pics just specs... you don't need to look at suspensiion you need to just use it...

If you're wanting to rally cross, don't even consider lowering the car. You may want to consider raising it a little.

yeah take my spring specs add 100lbs to each add 2" to the front spring and 1" to the rear... that would make the car rally cross ok...

I didn't say I wanted to lower the car I just wanted to up grade the stock susp. the rally x that I would run most is in Orange Vrgina (dc rally) and that track is in great cond. I do have a skid plate so I could get away with about an inch or less of a drop
also the GS Mirage is to have a sport tuned susp. does enyone know what this is to the stock susp.

_________________
1991 MIRAGE , 2003 OUTLANDER

Okay, I just saw where you mentioned the lowering springs. Pretty much your only option is coilovers as Tim has suggested.

If you dont already have a fuel tank skid plate, Road Race Engineering has a brand new aluminum one for sale. It replaces the stock mounting straps with a full aluminum tub design. The tub is about 3 inches tall all around except for two openings in the back corners to allow any water to drain back out. Might be a little hard core for a rallycross, but also cant hurt anything to have extra protection there....

Chris

thanks for the help guys check out www.cardomain.com/id/srt2477

_________________
1991 MIRAGE , 2003 OUTLANDER