Offline |
The Silent Administrator |
|
Joined: Wed Dec 24, 2003 3:32 pm Posts: 9524
Location: Ottawa, ON, Canada
|
It will run richer by whatever percentage more the injectors will flow fuel.
You have to use all the parts together, or just the throttle body alone and some 1/8" bigger on the exhaust system or just a free flowing muffler in place of the stock piece.
That is the only way this will work properly. I recommend port matching the intake inlet to the new TB and gasket. The inlet is way too small of the new part.
Take precautions to not get any metal shavings into the intake, by stuffing rags inside and maybe even taping a vacuum tube right next to where you are porting. You have to go a little Frankenstein sometimes.
|
|