| 4g61t.org http://4g61t.org/forum/ |
|
| f5m21 trans exploded http://4g61t.org/forum/viewtopic.php?f=17&t=39313 |
Page 1 of 5 |
| Author: | 1992bluemirage [ Thu Dec 04, 2014 8:18 pm ] |
| Post subject: | f5m21 trans exploded |
Anybody have a good f5m21 trans for sale or an idea what other trans i can use behind my 1.5? i just purchased a new clutch kit and flywheel and would like to be able to use them on the new trans. |
|
| Author: | 89Mirageman [ Thu Dec 04, 2014 10:23 pm ] |
| Post subject: | Re: f5m21 trans exploded |
Is yours cable clutch or hydraulic? |
|
| Author: | thomcasey [ Fri Dec 05, 2014 7:17 am ] |
| Post subject: | Re: f5m21 trans exploded |
If you are hydraulic, then the f5m31 will work. Using one now on a 1.5 |
|
| Author: | 1992bluemirage [ Fri Dec 05, 2014 9:48 am ] |
| Post subject: | Re: f5m21 trans exploded |
Yes the trans is hydraulic. Anybody have one for sale? |
|
| Author: | 1992bluemirage [ Fri Dec 05, 2014 11:13 am ] |
| Post subject: | Re: f5m21 trans exploded |
What did the f5m31 trans go in? |
|
| Author: | thomcasey [ Fri Dec 05, 2014 2:35 pm ] |
| Post subject: | Re: f5m21 trans exploded |
1.8l equipped Talon/Eclipse/Laser (1990-94) and 88-92 Galant are some that come to mind. |
|
| Author: | 1992bluemirage [ Fri Dec 05, 2014 3:35 pm ] |
| Post subject: | Re: f5m21 trans exploded |
So my clutch and axles would work with it? |
|
| Author: | 89Mirageman [ Fri Dec 05, 2014 5:13 pm ] |
| Post subject: | Re: f5m21 trans exploded |
The na 1g dsm's used the F5M22. The CSM axles won't work since the stubs are shorter. I thought the F5M31 came in the 94-98 Galants and the fwd summit/expo/colt vista. |
|
| Author: | 1992bluemirage [ Fri Dec 05, 2014 5:54 pm ] |
| Post subject: | Re: f5m21 trans exploded |
I really need to figure this out before I drop money on a trans I'm.stuck with. Another F5M21 would be great if anybody had one for sale. Its just a work car I need to get back on the road. |
|
| Author: | thomcasey [ Fri Dec 05, 2014 6:40 pm ] |
| Post subject: | Re: f5m21 trans exploded |
Well, the answer is yes, you stock stuff will work |
|
| Author: | 1992bluemirage [ Fri Dec 05, 2014 6:46 pm ] |
| Post subject: | Re: f5m21 trans exploded |
Im confused. 89Mirageman says that the axles wont work. So the F5M31 trans is the way to go? |
|
| Author: | 1992bluemirage [ Fri Dec 05, 2014 6:54 pm ] |
| Post subject: | Re: f5m21 trans exploded |
It looks like the slave cylinder on the F5M31 trans has a rod that pushes the fork. My F5M21trans has a little bracket on the end and a pin goes through it with a clip to the slave cylinder. |
|
| Author: | thomcasey [ Fri Dec 05, 2014 8:58 pm ] |
| Post subject: | Re: f5m21 trans exploded |
My colt had already come converted to the f5m31. I assume you would need a slave from a 1g eclipse unless the clutch forks are interchangeable? |
|
| Author: | 89Mirageman [ Sat Dec 06, 2014 12:29 am ] |
| Post subject: | Re: f5m21 trans exploded |
All I know is that the inner axle stubs that snap into the diff on the transmission are longer on a 1g dsm than they are on a 1.5 3g csm. The diameter and spline count are the same between both but I don't think the 1.5 axles will snap into the diff like they should. Maybe I'm missing something here. If Thom says he's running the same setup I don't doubt his word. I just don't see how the axles are staying in. Maybe there's something I'm overlooking. |
|
| Author: | 1992bluemirage [ Sat Dec 06, 2014 8:44 am ] |
| Post subject: | Re: f5m21 trans exploded |
Couldn't I just get axles for that F5m31 trans and use the inner joints on my axles? |
|
| Page 1 of 5 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|