So, if I bolt the flywheel up, order a new clutch set for a 1g, everything should work out perfect? And I thought the starter plate was just a dust shield?
Thanks for the reply man. Looks like I can finally have one of the Colts back up.
| 4g61t.org http://4g61t.org/forum/ |
|
| Non turbo F5M22 with 4G15 http://4g61t.org/forum/viewtopic.php?f=17&t=37895 |
Page 1 of 1 |
| Author: | jomorris2909 [ Wed Jun 26, 2013 6:55 am ] |
| Post subject: | Non turbo F5M22 with 4G15 |
Ok guys, I've been trying to find a replacement trans for a bit. Shaun has a F5M22 from a 1g DSM non turbo, and I know it will bolt up. But 1. will I need to use a different flywheel? Or is the 4G15 fine to reach the starter. 2. Will my Colt 1.5 CVs fit trans to frame distance? Or will I need a certain combo of CSM/DSM CV? |
|
| Author: | Incoltnito [ Thu Jun 27, 2013 2:57 am ] |
| Post subject: | Re: Non turbo F5M22 with 4G15 |
Quote: Ok guys, I've been trying to find a replacement trans for a bit. Shaun has a F5M22 from a 1g DSM non turbo, and I know it will bolt up.
But 1. will I need to use a different flywheel? Or is the 4G15 fine to reach the starter. 2. Will my Colt 1.5 CVs fit trans to frame distance? Or will I need a certain combo of CSM/DSM CV? Grab the 1g non turbo flywheel & clutch assembly for this, I believe the starter plate (between block and trans) you will need also. Perfect fitment with 1.5 Colt axles. |
|
| Author: | jomorris2909 [ Thu Jun 27, 2013 6:30 pm ] |
| Post subject: | Re: Non turbo F5M22 with 4G15 |
So, if I bolt the flywheel up, order a new clutch set for a 1g, everything should work out perfect? And I thought the starter plate was just a dust shield? Thanks for the reply man. Looks like I can finally have one of the Colts back up.
|
|
| Author: | thomcasey [ Fri Jun 28, 2013 6:27 am ] |
| Post subject: | Re: Non turbo F5M22 with 4G15 |
The starter plate lines up the starter and mounts it properly, you must have the correct starter plate for the transmission or you will not be starting the car. |
|
| Author: | Incoltnito [ Fri Jun 28, 2013 3:35 pm ] |
| Post subject: | Re: Non turbo F5M22 with 4G15 |
Quote: So, if I bolt the flywheel up, order a new clutch set for a 1g, everything should work out perfect?
Thanks for the reply man. Looks like I can finally have one of the Colts back up. Yes, so long as it is a N/A 1g FWD flywheel. |
|
| Author: | jomorris2909 [ Fri Jun 28, 2013 6:29 pm ] |
| Post subject: | Re: Non turbo F5M22 with 4G15 |
Copy on that starter plate, I don't think he is sending a starter plate attached or with, so I'll have to source one out of a N/A 1g, right? And he is sending a lightened flywheel for an NA 1g so Im good there. You guys are awesome. Thanks. |
|
| Author: | Incoltnito [ Sat Jun 29, 2013 3:49 am ] |
| Post subject: | Re: Non turbo F5M22 with 4G15 |
Quote: Copy on that starter plate, I don't think he is sending a starter plate attached or with, so I'll have to source one out of a N/A 1g, right?
And he is sending a lightened flywheel for an NA 1g so Im good there. You guys are awesome. Thanks. Yeah, and I believe you could even use a 1g turbo fwd starter plate as well. |
|
| Author: | ben4g63t1 [ Sun Jun 30, 2013 10:56 pm ] |
| Post subject: | Re: Non turbo F5M22 with 4G15 |
I'm not sure if it matters for the starter plate, but the 1g turbo bellhousing is bigger than a non turbo bellhousing. So if you use it I'm not sure it would work... Someone else on here may have more info/input on that though. |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|