4g61t.org
http://4g61t.org/forum/

How do you properly release timing belt tension?
http://4g61t.org/forum/viewtopic.php?f=17&t=35553		 Page 1 of 1
Author:  bosco2023 [ Fri Nov 04, 2011 8:19 am ]
Post subject:  How do you properly release timing belt tension?
That last 2 timing belts i have installed have been by getting the timing belt marks lined up and then rolling the belt onto the top cam gear sorta like putting a bike chain on.. There is not a lot of room between the block and shock tower as you know. Any tips or instructions? Does it unbolt or swing out of the way?
Author:  cloead [ Fri Nov 04, 2011 10:09 am ]
Post subject:  Re: How do you properly release timing belt tension?
Insert timing belt tensioner tool

Loosen timing belt tensioner pulley
Author:  CSM Shaun [ Fri Nov 04, 2011 1:25 pm ]
Post subject:  Re: How do you properly release timing belt tension?
Is this on a DOHC or SOHC engine?
Author:  89Mirageman [ Fri Nov 04, 2011 4:28 pm ]
Post subject:  Re: How do you properly release timing belt tension?
1.5's have a spring tensioner.
Author:  cloead [ Sat Nov 05, 2011 12:19 am ]
Post subject:  Re: How do you properly release timing belt tension?
Didn't realize what forum this was in.. my post was regarding a 4g63 :( sowwy
Author:  Flying Eagle [ Sat Nov 05, 2011 11:07 am ]
Post subject:  Re: How do you properly release timing belt tension?
Quote:
That last 2 timing belts i have installed have been by getting the timing belt marks lined up and then rolling the belt onto the top cam gear sorta like putting a bike chain on.. There is not a lot of room between the block and shock tower as you know. Any tips or instructions? Does it unbolt or swing out of the way?
Have you checked out the factory manual yet?
Author:  bosco2023 [ Sat Nov 05, 2011 11:17 am ]
Post subject:  Re: How do you properly release timing belt tension?
Quote:
Quote:
That last 2 timing belts i have installed have been by getting the timing belt marks lined up and then rolling the belt onto the top cam gear sorta like putting a bike chain on.. There is not a lot of room between the block and shock tower as you know. Any tips or instructions? Does it unbolt or swing out of the way?
Have you checked out the factory manual yet?

Dont have one. Had one with my colt and mirage, but not summit. On the last 1.5 I started to loosen the bolt, but then retightened as I didnt want anything to fall apart due to the lack of room I had to work with.
Author:  CSM Shaun [ Sat Nov 05, 2011 2:21 pm ]
Post subject:  Re: How do you properly release timing belt tension?
All the FSMs are available on Jason's site.
Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/