| 4g61t.org http://4g61t.org/forum/ |
|
| Short Shifter? http://4g61t.org/forum/viewtopic.php?f=17&t=34120 |
Page 1 of 1 |
| Author: | 89D15CRX [ Thu Jan 20, 2011 4:31 pm ] |
| Post subject: | Short Shifter? |
Anyone know if the 4G short shifter will work with the 89-92 shifter base? I tried to install a short shifter kit from a 1G DSM before and it didn't work because they are setup differently. I want an actual short shifter made for our 3gs but I'm having ALOT of trouble finding them unless I just cut the top shorter (which I did on my sedan and it's not really much of an upgrade unless you cut the bottom of the shifter itself and weld it back on...I had a really nice Neuspeed short shifter for my Integra and it was awesome. |
|
| Author: | slowdsm [ Thu Jan 20, 2011 7:24 pm ] |
| Post subject: | Re: Short Shifter? |
you do know that the dsm short shifters dont really shorten the shift pattern very much..there mostly just shorter in height.. if u want it to be a shorter throw..then do the mod to the trans shift lever.. I have done it on 2 cars now and love it. Steve |
|
| Author: | 89D15CRX [ Fri Jan 21, 2011 12:13 am ] |
| Post subject: | Re: Short Shifter? |
OK...how is this done? Just drill a hole a little further in from the post that it connects to from the factory? Do you happen to have any pics? I thought that mod was only for adapting a DSM trans to a CSM. |
|
| Author: | slowdsm [ Fri Jan 21, 2011 2:09 am ] |
| Post subject: | Re: Short Shifter? |
http://www.vfaq.com/mods/wayback/mario_shifter.html I didnt move mine as much as him..but still is real short throw...people who sit in the car to check it out are all like..holy shit thats tight. |
|
| Author: | 89D15CRX [ Fri Jan 21, 2011 2:37 am ] |
| Post subject: | Re: Short Shifter? |
I checked my 4G61 NA 5 speed shifter arm and it has a step in it that drops down and there's not enough room to drill another hole in it. It's not flat and straight like the one in the pic is. |
|
| Author: | CSM Shaun [ Fri Jan 21, 2011 5:12 am ] |
| Post subject: | Re: Short Shifter? |
You can try to remove the arm that is on the trans and replace it with a strait-style arm. But be prepared, it is a fight and a half to get them off clean. Be sure to invest in a GOOD punch to push the pin out. |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|