| 4g61t.org http://4g61t.org/forum/ |
|
| 4g15 head bolts http://4g61t.org/forum/viewtopic.php?f=17&t=33997 |
Page 1 of 1 |
| Author: | trooper [ Tue Dec 21, 2010 7:22 pm ] |
| Post subject: | 4g15 head bolts |
are the head bolts reusable that come in a 92 4g15? they have a hex style head and look like regular 1g dsm bolts. i cannot find new one's at any auto parts store here in cincy. thanks. |
|
| Author: | Flying Eagle [ Tue Dec 21, 2010 9:25 pm ] |
| Post subject: | Re: 4g15 head bolts |
If the manual says one final torque reading, then yes, but check for stretch anyways. If the manuals says that they have a torque reading then a degree angle - they are torque to yield and should probably be changed. www.lilevo.com/mirage/ |
|
| Author: | trooper [ Wed Dec 22, 2010 2:56 am ] |
| Post subject: | Re: 4g15 head bolts |
Thanks man. I searched the index and only could find a single torque spec. The spec was around 50 to 55 ft lbs. So that's what I put them too. |
|
| Author: | redneck4g15 [ Sat Jan 01, 2011 6:12 pm ] |
| Post subject: | Re: 4g15 head bolts |
Quote: are the head bolts reusable that come in a 92 4g15? they have a hex style head and look like regular 1g dsm bolts.
you are not going to find them at a parts house only dealer and they aren't cheap.
i cannot find new one's at any auto parts store here in cincy. thanks. |
|
| Author: | Legolas337 [ Mon Jan 03, 2011 11:44 pm ] |
| Post subject: | Re: 4g15 head bolts |
i found them at a NAPA like two years ago. didnt seem too hard to find. I think i had them the next day. dont remember the part number though. |
|
| Author: | 89D15CRX [ Tue Jan 04, 2011 9:09 am ] |
| Post subject: | Re: 4g15 head bolts |
Here's a NAPA close to you: NAPA AUTO PARTS City Wide Auto Parts 4990 Montgomery Road Cincinnati,OH 45212 (513) 242-1040 Cylinder Head Bolt part number is : FPG ES71206 Price is : $35.49 and comes with washers. Hope this helps buddy! AutoZone also has them... Part # : ES71206 Price : $29.99 Closest one to you is: 3146 Reading Cincinnati OH 45229 (513) 961-0700 |
|
| Author: | redneck4g15 [ Thu Jan 06, 2011 1:35 pm ] |
| Post subject: | Re: 4g15 head bolts |
the problem i ran across was the headbolts for 91-94 are different than 95 and up. and the cross referance was wrong, i try three different parts house and ran in to the same problem. the headbolts from the 95 and up are smaller in diamiter and shorter in lenght and have a 12 point head on it. thats what the parts houses were giving me. that is why i went to the dealer for the head bolt which i still have some where. |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|