4g61t.org

Okay, so we all know that the 4g63 turbo can be swapped into a 1.5L model with a few additional wires.

But what about other engines. Can a 4g63(or 4G64) SOHC Non Turbo engine be made to work. Should be very similar. Just use all of the mounts required for the turbo model. But what about the ECU and harness? Any chance that the original mirage/colt harness will work with no changes?

Here's a 4G64 on ebay. http://cgi.ebay.com/ebaymotors/ws/eBayI ... 1874821193

Seems like a good option, if someone was wanting to build a Naturally Aspirated racer.

As far as i have traced the 2.0 and 2.4 SOHC should be a direct swap for wiring. You may need to swap a wire or two at the distributor but other than that all the sensors should plug and play. Mas, ECU ect are all the same plugs. If i didn't have a turbo to put on in short order the 2.4 SOHC would be in mine already.