4g61t.org
http://4g61t.org/forum/

Hey guys I'm new here
http://4g61t.org/forum/viewtopic.php?f=101&t=41307
Page 1 of 1

Author:  NikosJawa [ Tue Apr 23, 2019 5:26 am ]
Post subject:  Hey guys I'm new here

So I am a car enthusiast from Greece now I am in pursuit for knowledge about the 4g63/4g61 because I want to start a project. A 4g61t powered AWD Evo 4 clone, it's like an actual Evo but a little bit different.

Author:  Flying Eagle [ Tue Apr 30, 2019 6:03 pm ]
Post subject:  Re: Hey guys I'm new here

Welcome!

Evo 4 will have the engine rotated 180 degrees to the 1987-1995 4g6x motors were otherwise oriented. Best to start with the proper motor and transmission for that platform.

Lots of other tech info here, but it mainly pertains to the 4g6x and 4g1x motors that were on the left hand side of the car, and transmission on the right hand side of the car.

Author:  NikosJawa [ Fri May 03, 2019 12:12 pm ]
Post subject:  Re: Hey guys I'm new here

Quote:
Welcome!

Evo 4 will have the engine rotated 180 degrees to the 1987-1995 4g6x motors were otherwise oriented. Best to start with the proper motor and transmission for that platform.

Lots of other tech info here, but it mainly pertains to the 4g6x and 4g1x motors that were on the left hand side of the car, and transmission on the right hand side of the car.
Thank you a lot. Maybe I will look into an evo 3 clone build because the 4g61 swap is a lot cheaper than an 4g92 mivec swap on a evo 4 clone

Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/