4g61t.org http://4g61t.org/forum/ |
|
Introducing my 92 swapped Expo http://4g61t.org/forum/viewtopic.php?f=100&t=40639 |
Page 1 of 1 |
Author: | Prostrho [ Tue Apr 26, 2016 6:56 pm ] |
Post subject: | Introducing my 92 swapped Expo |
Hi, After many long years. my swap is finally done. 1992 Expo SP 5MT AWD. just a 4G63 swap off a 92 talon. N23W RVR Esepelir springs on 1G KYB AGX. |
Author: | grndsm [ Wed Apr 27, 2016 1:28 am ] |
Post subject: | Re: Introducing my 92 swapped Expo |
Nice! What are your plans with it? |
Author: | Prostrho [ Wed Apr 27, 2016 12:53 pm ] |
Post subject: | Re: Introducing my 92 swapped Expo |
Initial plan was to build a 4G64 block with 4G63 head and build a reliable 300-400WHP daily driver since this car came with the 6 bolt 8V 4G64 engine. But due to budget reasons, just decided to throw in the 6 bolt 4G63T with stock everything for now as the engine was running well off the parts car. Its going to be my daily driver for a little bit and upgrade as I go (or when things break) |
Author: | 92expo4g63 [ Mon May 02, 2016 1:43 am ] |
Post subject: | Re: Introducing my 92 swapped Expo |
what did you do for wiring ? |
Author: | Prostrho [ Mon May 02, 2016 3:07 pm ] |
Post subject: | Re: Introducing my 92 swapped Expo |
I merged the factory Expo Harness with my 92 Talon harness. All the factory functions is maintained. Only thing I haven't tested is the AC. As the Talon has a dual pressure switch and the Expo has a triple pressure switch. So I'm not sure if it will work. I have some hand written notes I can post up to show which wires from the Talon harness should connect with the Expo factory wires if you need anymore info. |
Author: | 92expo4g63 [ Mon May 02, 2016 7:04 pm ] |
Post subject: | Re: Introducing my 92 swapped Expo |
That would be awsome.. |
Author: | lesmirage883 [ Tue May 31, 2016 8:30 pm ] |
Post subject: | Re: Introducing my 92 swapped Expo |
I would appreciate the wiring notes also. Just dropped in my 4G63 T in my 1992 summit and need to do the wiring soon. |
Page 1 of 1 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |