4g61t.org

Specializing in the 3g CSM
It is currently Thu Mar 28, 2024 11:42 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 130 posts ]  Go to page Previous 1 2 3 4 59 Next
Author Message
 Post subject:
PostPosted: Thu Apr 15, 2004 2:05 am 
Offline
CSM Junkie
User avatar

Joined: Sat Mar 29, 2003 2:07 am
Posts: 614
Location: Murray, UT
so on the ECU side we have pin 1 for DATA pin 10 for DIAG and pin 12 for GND so i just splice into the wire for pin 12 with 10?? cause on the LAPTOP side there are only 2 wires.....(yes im slow... it's not my fault i was raised un moronville errrrrrr.....mormanville;) )

_________________
1983 Honda VF750F
1986 Chevrolet C-10 305
1990 Eagle Summit ES 4g63na 5spd
1990 Chevrolet Corvette L98
1996 GMC Suburban 454
1999 Volvo S70 AWD L.P.T


Top
   
 Post subject:
PostPosted: Thu Apr 15, 2004 2:07 am 
Offline
4g61t Delinquent
User avatar

Joined: Wed Dec 25, 2002 7:44 pm
Posts: 1740
Location: Hesperia, CA(In the Mojave desert)
Quote:
so on the ECU side we have pin 1 for DATA pin 10 for DIAG and pin 12 for GND so i just splice into the wire for pin 12 with 10?? cause on the LAPTOP side there are only 2 wires.....(yes im slow... it's not my fault i was raised un moronville errrrrrr.....mormanville;) )
:lol: FINALLY THE TRUTH COMES OUT!!!!!!!!!!! :lol:

_________________
I own a CSM.
I live my life 1 repair at a time.
Nothing matters...not my crew...my bills, nor my friends drama...
For those 10 months or less... I'm broke...


Top
   
 Post subject:
PostPosted: Thu Apr 15, 2004 5:50 pm 
Offline
CSM Junkie

Joined: Tue Nov 13, 2001 7:00 pm
Posts: 573
Location: Melbourne, Australia
I would say yes - To put the ecu into logging mode you connect those two wires you mentioned.

_________________
1991 CB Lancer GSR (5dr Hatchback) with 4g61t conversion - 132kw/180hp @ the front wheels. SOLD!

Check out my website: www.members.optusnet.com.au/~onnzo

Member #31


Top
   
 Post subject:
PostPosted: Wed May 19, 2004 8:09 pm 
Offline
Restricted Newbie

Joined: Wed May 19, 2004 8:02 pm
Posts: 3
Location: Washington
How do all you guys know how to make the cable just from looking at the schematic? My friends and I all looked at it and we have no clue what the means. I wan't to make a cable for my 91 talon. Aslo I thought there were supposed to be three wires in the cable?

Thanks,
Brian


Top
   
 Post subject:
PostPosted: Wed May 19, 2004 9:45 pm 
Offline
CSM Junkie

Joined: Tue Nov 13, 2001 7:00 pm
Posts: 573
Location: Melbourne, Australia
There are three wires at the datalogger end, ony two at the palm end as one of the wires splices into two... making three wires.

_________________
1991 CB Lancer GSR (5dr Hatchback) with 4g61t conversion - 132kw/180hp @ the front wheels. SOLD!

Check out my website: www.members.optusnet.com.au/~onnzo

Member #31


Top
   
 Post subject:
PostPosted: Thu May 20, 2004 9:49 pm 
Offline
Restricted Newbie

Joined: Wed May 19, 2004 8:02 pm
Posts: 3
Location: Washington
Does anyone have a pic of the whole cable and a close up on the ends for a palm?


Top
   
 Post subject:
PostPosted: Fri May 21, 2004 1:24 am 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Oct 27, 2003 1:00 am
Posts: 272
Location: Christchurch, New Zealand
Quote:
Does anyone have a pic of the whole cable and a close up on the ends for a palm?
There's nothing in it to photo really, tx, rx and gnd... the circuit diagram says it all...


Top
   
 Post subject:
PostPosted: Fri May 21, 2004 8:43 am 
Offline
Member
User avatar

Joined: Sun Sep 28, 2003 4:49 pm
Posts: 97
Location: Trois-Rivieres, Qc, Canada
Image


This is a simplified picture of my datalogger calbe, hope it will help you

_________________
Swap
Begin: September 16 2005
End: October 7 2005

Rebuilt
Begin: April 16 2006
End:June 1st 2006

But still not running


Top
   
 Post subject:
PostPosted: Sun May 23, 2004 4:04 pm 
Offline
Restricted Newbie

Joined: Wed May 19, 2004 8:02 pm
Posts: 3
Location: Washington
Hey guys thanks for all your help I got it working. :D I figured out what my problem was I am using pocketlogger software and with that you have to switch pins 2&3 then it will work. Now if i could just get it to work with my sony clie that would be nice. I have been testing it with a friends palm because I know it works. Anyone useing this cable with a sony clie? I think I am going to try and make my own serial cable and see if that will make it work.


Top
   
 Post subject:
PostPosted: Sun May 23, 2004 9:54 pm 
Offline
CSM Junkie

Joined: Tue Nov 13, 2001 7:00 pm
Posts: 573
Location: Melbourne, Australia
There is a list of compatible devices on the mmcd stie (or teh pocket logger site if you are using pocket logger software)

It depends on what palm os the pda uses.

Mike

_________________
1991 CB Lancer GSR (5dr Hatchback) with 4g61t conversion - 132kw/180hp @ the front wheels. SOLD!

Check out my website: www.members.optusnet.com.au/~onnzo

Member #31


Top
   
 Post subject:
PostPosted: Sun May 23, 2004 10:17 pm 
Offline
Member
User avatar

Joined: Sun Sep 28, 2003 4:49 pm
Posts: 97
Location: Trois-Rivieres, Qc, Canada
Will it be a problem if the cable is connect to the ECU permanently?

_________________
Swap
Begin: September 16 2005
End: October 7 2005

Rebuilt
Begin: April 16 2006
End:June 1st 2006

But still not running


Top
   
 Post subject:
PostPosted: Mon May 24, 2004 4:48 am 
Offline
CSM Junkie

Joined: Tue Nov 13, 2001 7:00 pm
Posts: 573
Location: Melbourne, Australia
Nope - but if you are adjusting timing - you have to disconnect it.

_________________
1991 CB Lancer GSR (5dr Hatchback) with 4g61t conversion - 132kw/180hp @ the front wheels. SOLD!

Check out my website: www.members.optusnet.com.au/~onnzo

Member #31


Top
   
 Post subject:
PostPosted: Mon Jun 14, 2004 6:58 pm 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Fri Feb 27, 2004 12:14 am
Posts: 266
Location: boulder, co
alright...finally got everything soldered up (pretty positive i wired it right) and the palm doesn't get any readings. it behaves just like when i run mmcd w/o it plugged in. is it supposed to beep like when i hotsync to my computer? any suggestions on what might be wrong?
thanks...

_________________
1g smic, 2.5" turboback, 1g exhaust cam, abs intake, 13g turbo, mbc, vdo boost gauge, greddy egt


Top
   
 Post subject:
PostPosted: Tue Jun 15, 2004 3:53 am 
Offline
CSM Junkie

Joined: Tue Nov 13, 2001 7:00 pm
Posts: 573
Location: Melbourne, Australia
Have you started logging? Start up mmcd, open a new log and unpause...

_________________
1991 CB Lancer GSR (5dr Hatchback) with 4g61t conversion - 132kw/180hp @ the front wheels. SOLD!

Check out my website: www.members.optusnet.com.au/~onnzo

Member #31


Top
   
 Post subject:
PostPosted: Tue Jun 15, 2004 4:06 am 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Fri Feb 27, 2004 12:14 am
Posts: 266
Location: boulder, co
yep. did that.
car's running. unpaused (selected sensor's flashing down in the bottom left). just no data coming in.
the switching diode has to go in a certain way, right (ie: it can't go backwards)? mine has the little band on the side farther from the palm (if that makes sense)...is that wrong?
please and thanks guys.

_________________
1g smic, 2.5" turboback, 1g exhaust cam, abs intake, 13g turbo, mbc, vdo boost gauge, greddy egt


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 130 posts ]  Go to page Previous 1 2 3 4 59 Next

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited