| 4g61t.org http://4g61t.org/forum/ |
|
| Gauge Face Covers for CSM's - Stock and Custom http://4g61t.org/forum/viewtopic.php?f=10&t=16343 |
Page 1 of 1 |
| Author: | netninja2001 [ Wed Jan 11, 2006 11:31 pm ] |
| Post subject: | Gauge Face Covers for CSM's - Stock and Custom |
First off, are links to gauges you can print out and make or show, a printing place to have them produce some "professional" faces for you. I have the pictures uploaded to Imageshack now. Saved them!!! Photobucket dump of all the gauge cluster faces!!!!! *Warning* A couple words before you print off a Turbo cluster face for a Non-Turbo transmission setup - You need to get a different cluster to accommodate the calibration difference - the gears in the transmissions are the same however. So putting a Turbo cluster in a Non-Turbo car is perfectly acceptable, but not applicable to put a Turbo cluster face on a Non-Turbo gauge cluster. Also to note, is that changing the top speed range and or putting a in a cluster of lower mileage may be prohibitive in your local jurisdiction so be forewarned about that. If this is just for personal use, you may be OKAY. *End Warning* North American, United States Turbo CSM Imperial setup: - 145 MPH Speedometer 6380x5904 resolution ![]() 640x592 resolution ![]() - Tachometer 7000 RPM Redline 6376x5912 resolution ![]() 640x593 resolution ![]() Australian/New Zealand, Cyborg Metric setup: - 240 KPH Speedometer ![]() - Tachometer 7500 RPM Redline ![]() - Australian 1989 Lancer Non Turbo White Face Cluster 200 KMH 6000 RPM Redline ![]() Europe, Germany Factory NA Black Face, Metric Setup: coltanostra's gauge faces: German 4G15 8V/12V NA, 5 Speed, 200 KMH Speedometer, 6000 RPM Redline Tachometer - 200 KMH Speedometer ![]() - 6000 RPM Redline Tachometer ![]() Secondly, we have Gauge faces that show you what the other countries and their imported vehicles have come equipped with originally, or which have had aftermarket faces installed. North America, United States: United States, Mirage GS, Factory Imperial setup: - 1.6L NA, Automatic, 145 MPH, 7000 RPM Redline ![]() United States: Gage's (RIP) gauges: - 125 MPH Speedometer, 6000 RPM Redline ![]() United States: summitman's custom gage faces: - Speedometer ![]() Tachometer ![]() United States: - Red White and Blue 125 MPH: ![]() - Red White and Blue 125 MPH: Mitsubishi Mirage Labels ![]() North America, Canada: - Ed Wong's custom Metric gauges (Produced most likely by Gage .... ?) ![]() New Zealand and Australia: New Zealand, Mitsubishi Mirage Colt (yes Mirage Colt) 1991 Metric setup: snowdevl's factory gauge faces - 4G61 NA, 5 speed, 180 KMH, 7000 RPM Redline start, 7500 RPM FULL Redline ![]() New Zealand, Mitsubishi S Swift R 1991, Metric setup: snowdevl's factory gauge faces - 4G61 NA, Auto, 180 KMH, 7000 RPM Red Line start, 7500 RPM FULL Redline New Zealand, Mitsubishi Cyborg 1988, Metric setup: snowdevl's factory gauge faces - 4G61 NA, 5 Speed, 180KMH, 7000 RPM Redline start, 7500 RPM FULL Redline ![]() Europe (Britain, Germany, Denmark, Sweden, Finland, Croatia, etc.): Finland, Colt GTi, Metric Setup: Most likely Non Turbo vehicle with Turbo aftermarket gearing faces - 240 KMH, 7000 RPM Red Line start, 7500 RPM FULL Redline ![]() Germany, Colt Metric setup: coltanostra's gauges: - Colt GTi 4G61/4G67 Factory Metric setup, 5 Speed,240 KMH Speedometer, 7000 RPM Redline Start, 7500 RPM FULL Redline ![]() coltanostra's gauges: - 4G13 8V Factory Metric setup, 200 KMH Speedometer only, with Gas and Temp gauges ![]() Germany, Colt/Mirage Metric setup: coltanostra's gauges: Non Turbo, 200-210 KMH, 7500 RPM Redline (Showing might not be factory spec - pending) - Picture 1 ![]() - Picture 2 ![]() - Picture 3 ![]() More German Gauge face swaps, Colt GTI Metric setup: Non Turbo Colt Mirage, 260 KMH Speedometer, Tachometer 6500 RPM Red Line start, 7500 RPM FULL Redline (Showing might not be factory spec - pending) - GTI Pic 1 ![]() - GTI Pic 2 ![]() - GTI Pic 3 ![]() - GTI Pic 4 ![]() MORE TO COME, teh time is now Sunday, Jan. 15, 2006 1:33AM |
|
| Author: | Flying Eagle [ Wed Jan 15, 2014 5:27 pm ] |
| Post subject: | Re: Gauge Face Covers for CSM's - Stock and Custom |
Uploaded Gauge Face pics to Imageshack. Saved!!!!! Tons of pics if you want someone to make overlays worth a grain of salt and accuracy. Be sure to read the post about which ones jive with which clusters. They can only go one way. |
|
| Author: | Flying Eagle [ Mon Nov 09, 2015 8:24 pm ] |
| Post subject: | Re: Gauge Face Covers for CSM's - Stock and Custom |
Link is now active at the top of the page, first post, first link. |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|